Users Guide
system Enter the keyword system to copy the Dell Networking OS image from the management
unit to the designated stack members.
stack-unit Enter the stack-unit number. For the S6000, the range is from 0 to 5.
all Enter the keyword all to copy the designated image to all stack members.
A Enter the keyword A to upgrade all stacked units in System A ( only).
B Enter the keyword B to upgrade all stacked units in System B ( only).
Defaults none
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information To reboot using the new image, use the upgrade boot system stack-unit command.
Related Commands
• reload — reboots Dell Networking OS.
• reset stack-unit — resets the designated stack member.
• show system — displays the status of all stack members or a specic member.
• show version — displays the current Dell Networking OS version information on the system.
Stacking 1529