Users Guide

-- Unit 0 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : S6000 - 32-port TE/FG (SI)
Current Type : S6000 - 32-port TE/FG (SI)
Master priority : 0
Hardware Rev : 4.0
Num Ports : 128
Up Time : 19 min, 19 sec
Dell Networking OS Version : 9-4(0-168)
Jumbo Capable : yes
POE Capable : no
FIPS Mode : disabled
Burned In MAC : 90:b1:1c:f4:9b:79
No Of MACs : 3
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm)
-----------------------------------------------------------
0 0 down UNKNOWN down 0
0 1 up AC up 6600
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
----------------------------------------------------
0 0 up up 7072 up 7021
0 1 up up 7021 up 7123
0 2 up up 7072 up 7021
Speed in RPM
-- Unit 1 --
Unit Type : Member Unit
Status : not present
-- Unit 2 --
Unit Type : Member Unit
Status : not present
-- Unit 3 --
Unit Type : Member Unit
Status : not present
-- Unit 4 --
Unit Type : Member Unit
Status : not present
-- Unit 5 --
Unit Type : Member Unit
Status : not present
Dell#
Related Commands
• show hardware stack-unit – displays the data plane and management plane input and output statistics of a
particular stack member.
show tech-support
Display a collection of data from other show commands, necessary for Dell Networking technical support to perform troubleshooting.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keywords stack-unit to view CPU memory usage for the
stack member designated by unit-id.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time. Press the SPACE
BAR to view the next 24 lines. Press the ENTER key to view the next line of text.
When using the pipe command ( | ), enter one of these keywords to lter command
output. For details about ltering commands, refer to CLI Basics.
save Enter the keyword save to save the command output.
142 Control and Monitoring