Users Guide

Usage Information
Use this command to specify the name of the output QoS policy. Once output policy is specied, rate-shape,
scheduler strict, bandwidth-percentage, and WRED can be dened. This command enables the qos-policy-output
conguration mode—(conf-qos-policy-out).
Related Commands
• bandwidth-percentage — assigns percentage of bandwidth to the class/queue.
• wred — assigns yellow or green drop precedence.
rate-police
Specify the policing functionality on incoming trac.
S6000
Syntax
rate-police [kbps] committed-rate [burst-KB] [peak [kbps] peak-rate [burst-KB]]
Parameters
kbps Enter the keyword kbps to specify the rate limit in Kilobits per second (Kbps). Make the
following value a multiple of 64. The range is from 0 to 40000000. The default granularity
is Megabits per second (Mbps).
committed-rate Enter the bandwidth in Mbps. The range is from 0 to 40000.
burst-KB (OPTIONAL) Enter the burst size in KB. The range is from 16 to 200000. The default is
100.
peak peak-rate (OPTIONAL) Enter the keyword peak then a number to specify the peak rate in Mbps.
The range is from 0 to 40000. The default is the same as designated for committed-
rate
.
Defaults Burst size is 100KB. peak-rate is by default the same as committed-rate. Granularity for committed-
rate and peak-rate is Mbps unless you use the kbps option.
Command Modes QOS-POLICY-IN
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
1258 Quality of Service (QoS)