Users Guide

reload
Reboot the system.
Syntax
reload [conditional nvram-cfg-change | no-confirm [discard-running]]
Parameters
conditional nvram-
cfg-change
(OPTIONAL) Reload into the Dell Networking Operating System (OS) if the condition is
true. A conguration change to the NVRAM requires a switch reload. To reload the
switch, select nvram-cfg-change.
no-conrm
[discard-running]
Reload the chassis without prompting for further conrmation.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0)
Introduced the no-confirm option.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
9.1(0.0) Added ‘conditional’ parameter.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information
If you use only the reload command, the system boots into the Dell Networking OS.
If there is a change in the running conguration, the system prompts you to save the new conguration when you
reload the system using the reload command. You can also save your running conguration manually using the
copy running-config command.
You can use the conditional parameter if any conguration changes made to the NVRAM, such as, stack-
group and fanout congurations, must be saved.
Control and Monitoring 119