Reference Guide

Field Description
• ?? — the entry is suspect.
TTL Displays the amount of time until the entry ages out of the
cache. For dynamically learned entries only.
Type Displays IP as the type of entry.
Address Displays the IP addresses assigned to the host.
Example
Dell#show hosts
Default domain is not set
Name/address lookup uses static mappings
Name servers are not set
Host Flags TTL Type Address
-------- ----- ---- ---- -------
ks (perm, OK) - IP 2.2.2.2
4200-1 (perm, OK) - IP 192.68.69.2
1230-3 (perm, OK) - IP 192.68.99.2
ZZr (perm, OK) - IP 192.71.18.2
Z10-3 (perm, OK) - IP 192.71.23.1
Dell#
Related
Commands
traceroute — views the DNS resolution.
ip host — configures a host.
show ip cam stack-unit
Display CAM entries for an S-Series or Z-Series switch.
S6000
Syntax
show ip cam stack-unit {id} [port-set {pipe-number} | hostname
{ip-address mask [longer-prefixes [ecmp-group detail]]}| ecmp-
group {detail | member-info [detail [group-index index-
number]]}| summary]
Parameters
id Enter the stack-unit ID. The unit ID range is from 0 to 7 for
the S6000.
port-set pipe-
number
Enter the keyword port-set then the number of the stack
unit’s port-pipe.
The unit ID range is from 0 to 0 for the
S6000.
hostname Enter the hostname in A.B.C.D format.
IPv4 Routing
739