Reference Guide

Version 9.2(0.0) Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Related
Commands
clear logging — clears the logging buffer.
default logging console — returns the logging console parameters to the default
setting.
show logging — displays the logging setting and system messages in the internal
buffer.
logging facility
Configure the Syslog facility used for error messages sent to Syslog servers.
S6000
Syntax
logging facility [facility-type]
To return to the default values, use the no logging facility command.
Parameters
facility-type (OPTIONAL) Enter one of the following parameters:
• auth (authorization system)
• cron (Cron/at facility)
• deamon (system deamons)
• kern (kernel)
• local0 (local use)
• local1 (local use)
• local2 (local use)
• local3 (local use)
• local4 (local use)
• local5 (local use)
• local6 (local use)
• local7 (local use)
• lpr (line printer system)
1346
Simple Network Management Protocol (SNMP) and Syslog