Reference Guide

770 | sFlow
www.dell.com | support.dell.com
• Show sFlow on a Line Card
Show sFlow Globally
To view sFlow statistics, use the following command :
Figure 43-2 is a sample output from the
show sflow command:
Figure 43-2. Command Example: show sflow
Show sFlow on an Interface
To view sFlow information on a specific interface, use the following command :
Figure 43-3 is a sample output from the
show sflow interface command.
Figure 43-3. Command Example: show sflow interface
Command Syntax Command Mode Purpose
show sflow EXEC Display sFlow configuration information and statistics.
Command Syntax Command Mode Purpose
show sflow interface
interface-name
EXEC Display sFlow configuration information and statistics on a
specific interface.
FTOS#show sflow
sFlow services are enabled
Global default sampling rate: 32768
Global default counter polling interval: 20
1 collectors configured
Collector IP addr: 133.33.33.53, Agent IP addr: 133.33.33.116, UDP port: 6343
77 UDP packets exported
0 UDP packets dropped
165 sFlow samples collected
69 sFlow samples dropped due to sub-sampling
stack-unit 1 Port set 0 H/W sampling rate 8192
Te 1/16: configured rate 8192, actual rate 8192, sub-sampling rate 1
Te 1/17: configured rate 16384, actual rate 16384, sub-sampling rate 2
Indicates sFlow is globally enabled
Indicates sFlow is enabled on
line cards Te 1/16 and Te 1/17
FTOS#show sflow interface Tengigabitethernet 1/16
Te 1/16
Configured sampling rate :8192
Actual sampling rate :8192
Sub-sampling rate :2
Counter polling interval :15
Samples rcvd from h/w :33
Samples dropped for sub-sampling :6