Reference Guide

Rapid Spanning Tree Protocol (RSTP) | 705
40
Rapid Spanning Tree Protocol (RSTP)
Rapid Spanning Tree Protocol (RSTP) is supported on the following platforms: s z
Protocol Overview
Rapid Spanning Tree Protocol (RSTP) is a Layer 2 protocol—specified by IEEE 802.1w—that is
essentially the same as Spanning-Tree Protocol (STP) but provides faster convergence and interoperability
with switches configured with STP and MSTP.
FTOS supports three other variations of Spanning Tree, as shown in Table 40-1.
Configuring Rapid Spanning Tree
Configuring Rapid Spanning Tree is a two-step process:
1. Configure interfaces for Layer 2. Refer to page 48.
2. Enable Rapid Spanning Tree Protocol. Refer to page 49.
Related Configuration Tasks
• Add and Remove Interfaces
Table 40-1. FTOS Supported Spanning Tree Protocols
Dell Networking Term IEEE Specification
Spanning Tree Protocol (STP) 802.1d
Rapid Spanning Tree Protocol
(RSTP)5
802.1w
Multiple Spanning Tree Protocol
(MSTP)
802.1s
Per-VLAN Spanning Tree Plus
(PVST+)
Third Party