Reference Guide

Quality of Service (QoS) | 679
You can create a custom WRED profile or use on of the five pre-defined profiles.
Create WRED Profiles
To create a WRED profile:
1. Create a WRED profile using the
wred command from CONFIGURATION mode.
2. The
wred command places you in WRED mode. From this mode, specify minimum and maximum
threshold values using the
threshold command.
Apply a WRED profile to traffic
After you create a WRED profile you must specify which traffic FTOS should apply the profile.
Table 37-6. Pre-defined WRED Profiles (S4810)
Default Profile
Name
Minimum
Threshold
Maximum
Threshold
Maximum
Drop Rate
wred_drop 0 0 100
wred_teng_y 467 4671 100
wred_teng_g 467 4671 50
wred_fortyg_y 467 4671 50
wred_fortyg_g 467 4671 25