Reference Guide

396 | Interfaces
www.dell.com | support.dell.com
Configure Interface Sampling Size
Use the rate-interval command, in INTERFACE mode, to configure the number of seconds of traffic
statistics to display in the
show interfaces output.
Although any value between 30 and 299 seconds (the default) can be entered, software polling is done
once every 15 seconds. So, for example, if you enter “19”, you will actually get a sample of the past 15
seconds.
All LAG members inherit the rate interval configuration from the LAG.
Figure 20-31
shows how to configure rate interval when changing the default value:
FTOS#show interfaces switchport
Name: TengigabitEthernet 13/0
802.1QTagged: True
Vlan membership:
Vlan 2
Name: TengigabitEthernet 13/1
802.1QTagged: True
Vlan membership:
Vlan 2
Name: TengigabitEthernet 13/2
802.1QTagged: True
Vlan membership:
Vlan 2
Name: TengigabitEthernet 13/3
802.1QTagged: True
Vlan membership:
Vlan 2
--More--