Reference Guide

2 | About this Guide
www.dell.com | support.dell.com
Conventions
This document uses the following conventions to describe command syntax:
Information Symbols
Table 1-1 describes symbols contained in this guide.
Related Documents
For more information about the Dell Networking S-Series and Z-Series refer to the following documents:
• FTOS Command Line Reference for the S6000
• S6000 Installing the System
• Release Notes for FTOS version 9.0.2.0 and the S6000
Convention Description
keyword Keywords are in bold and should be entered in the CLI as listed.
parameter Parameters are in italics and require a number or word to be entered in the CLI.
{X} Keywords and parameters within braces must be entered in the CLI.
[X] Keywords and parameters within brackets are optional.
x | y Keywords and parameters separated by bar require you to choose one.
Table 1-1. Information Symbols
Symbol Brief Description
s
S-Series
This symbol indicates that the selected feature is supported on the
S-Series. Note that when a feature is supported on all the S-Series systems,
including the S4810, this symbol is used.
S4810
This symbol indicates that the selected feature is supported on the S4810
platform.
S6000 This symbol indicates that the selected feature is supported on the S6000
platform.
z
Z-Series This symbol indicates that the selected feature is supported on the Z-Series.
*
Exception This symbol is a note associated with some other text on the page that is
marked with an asterisk.