Administrator Guide

0/0 BSR messages sent/received
0/0 State-Refresh messages sent/received
0/0 MSDP updates sent/received
0/0 Null Register messages sent/received
0/0 Register-stop messages sent/received
Data path event summary:
0 no-cache messages received
0 last-hop switchover messages received
0/0 pim-assert messages sent/received
0/0 register messages sent/received
DellEMC#
Dell#show ipv6 pim interface
Interface Ver/ Nbr Query DR
Mode Count Intvl Prio
Te 1/3 v2/S 1 30 1
Address : fe80::201:e8ff:fe02:140f
DR : this router
Te 1/11 v2/S 0 30 1
Address : fe80::201:e8ff:fe02:1417
DR : this router
Dell#
Creating Multicast Boundaries and Domains
A PIM domain is a contiguous set of routers that all implement PIM and are configured to operate within a common boundary defined by
PIM multicast border routers (PMBRs).
PMBRs connect each PIM domain to the rest of the Internet.
Create multicast boundaries and domains by filtering inbound and outbound bootstrap router (BSR) messages per interface. The following
command is applied to the subsequent inbound and outbound updates. Timeout removes existing BSR advertisements.
• Create multicast boundaries and domains by filtering inbound and outbound BSR messages per interface.
ip pim bsr-border
• Remove candidate RP advertisements.
clear ip pim rp-mapping
618
PIM Sparse-Mode (PIM-SM)