Deployment Guide
Table Of Contents
- 1 Introduction
- 2 Hardware overview
- 3 Topology options
- 4 VxRail in the data center
- 5 Configuration planning
- 6 Switch configuration prerequisites
- 7 Configure switches
- 8 Switch validation
- 9 Deploy VxRail
- 10 Use of VxRail 4.7.0 to validate Dell EMC Networking S5200F-ON
- A Validated components for S5148F-ON using VxRail 4.5
- B Validated components for S5248F-ON and S5232F-ON using VxRail 4.7.0
- C VxRail network adapter traffic optimization
- D Configure breakouts on port groups and interfaces
- E Technical resources
- F Support and feedback
8 Dell EMC Networking OS10 Enterprise Edition Switch Configuration Guide for VxRail featuring S5248F-ON,
S5232F-ON and S5148F-ON
1.2 Typographical conventions
The CLI and GUI examples in this document use the following conventions:
Monospace Text CLI examples
Underlined Monospace Text CLI examples that wrap the page
Italic Monospace Text Variables in CLI examples
Bold Monospace Text Commands entered at the CLI prompt, or to highlight information in CLI
output
Bold text GUI fields and information entered in the GUI
1.3 Attachments
This document in .pdf format includes switch configuration file attachments. To access attachments in Adobe
Acrobat Reader, click the icon in the left pane halfway down the page, then click the icon.