Deployment Guide
Table Of Contents
- 1 Introduction
- 2 Hardware overview
- 3 Topology options
- 4 VxRail in the data center
- 5 Configuration planning
- 6 Switch configuration prerequisites
- 7 Configure switches
- 8 Switch validation
- 9 Deploy VxRail
- 10 Use of VxRail 4.7.0 to validate Dell EMC Networking S5200F-ON
- A Validated components for S5148F-ON using VxRail 4.5
- B Validated components for S5248F-ON and S5232F-ON using VxRail 4.7.0
- C VxRail network adapter traffic optimization
- D Configure breakouts on port groups and interfaces
- E Technical resources
- F Support and feedback
7 Dell EMC Networking OS10 Enterprise Edition Switch Configuration Guide for VxRail featuring S5248F-ON,
S5232F-ON and S5148F-ON
1.1 Supported switches and operating systems
The examples provided in this deployment guide use VxRail 4.5 nodes connected to Dell EMC Networking
S5148F-ON switches running Dell Networking OS10EE. This document also includes examples for S5248F-
ON and S5232F-ON with VxRail 4.7.0.
Dell EMC Networking supports the following switch and OS combinations for VxRail 4.0 and later:
Supported Dell EMC Networking switches and operating systems