Users Guide

Switch validation
37 Dell EMC Networking OS9 Switch Configuration Guide for VxRail 4.5
Note: For the dual switch without VLT topology, the VLAN portion of the command output is as follows:
NUM Status Description Q Ports
* 1 Inactive
1611 Active InBand_Mgmt U Po127(Hu 1/53,1/54)
U Tf 1/9,1/17-1/20
1612 Active vMotion T Po127(Hu 1/53,1/54)
T Tf 1/17-1/20
1613 Active vSAN T Po127(Hu 1/53,1/54)
T Tf 1/17-1/20
1614 Active VM_Network_A T Po127(Hu 1/53,1/54)
T Tf 1/17-1/20
1615 Active VM_Network_B T Po127(Hu 1/53,1/54)
T Tf 1/17-1/20
For the single switch topology, the VLAN portion is as follows:
NUM Status Description Q Ports
* 1 Inactive
1611 Active InBand_Mgmt U Tf 1/9-1/10,1/17-1/24
1612 Active vMotion T Tf 1/17-1/24
1613 Active vSAN T Tf 1/17-1/24
1614 Active VM_Network_A T Tf 1/17-1/24
1615 Active VM_Network_B T Tf 1/17-1/24
8.1.4 show lldp neighbors
The show lldp neighbors command is useful for identifying connected equipment. Interface Tf 1/9 is
connected to the jump box. Interfaces Tf 1/17-20 are connected to the Broadcom adapter in each of the
VxRail nodes and Hu 1/53-54 are connected to the other leaf. Interface Ma 1/1 is the OOB management
interface.
S5048F-Leaf1A#show lldp neighbors
Loc PortID Rem Host Name Rem Port Id Rem Chassis Id
-------------------------------------------------------------------------------
Tf 1/9 - 00:0a:f7:38:ba:a0 00:0a:f7:38:ba:a0
Tf 1/17 Broadcom Adv. D...00:0a:f7:b6:15:d0 00:0a:f7:b6:15:d0
Tf 1/18 Broadcom Adv. D...00:0a:f7:b6:1a:80 00:0a:f7:b6:1a:80
Tf 1/19 Broadcom Adv. D...00:0a:f7:b6:11:c0 00:0a:f7:b6:11:c0
Tf 1/20 Broadcom Adv. D...00:0a:f7:b6:1c:10 00:0a:f7:b6:1c:10
Hu 1/53 S5048F-Leaf1B hundredGigE 1/53 d8:9e:f3:bb:d6:20
Hu 1/54 S5048F-Leaf1B hundredGigE 1/54 d8:9e:f3:bb:d6:20
Ma 1/1 Mgmt-Rack172 Gi1/0/42 28:f1:0e:ef:dd:88
Note: For the dual switch without VLT topology, the output is identical to the above. For the single switch
topology, the output includes all eight node-connected ports, and ports 1/53-54 are not used.