Users Guide

Configure switches
30 Dell EMC Networking OS9 Switch Configuration Guide for VxRail 4.5
S5048F-Leaf1A
S5048F-Leaf1B
interface Vlan 1614
description VM_Network_A
no ip address
tagged twentyFiveGigE 1/17-1/20
tagged Port-channel 127
no shutdown
interface Vlan 1615
description VM_Network_B
no ip address
tagged twentyFiveGigE 1/17-1/20
tagged Port-channel 127
no shutdown
end
write memory
interface Vlan 1614
description VM_Network_A
no ip address
tagged twentyFiveGigE 1/17-1/20
tagged Port-channel 127
no shutdown
interface Vlan 1615
description VM_Network_B
no ip address
tagged twentyFiveGigE 1/17-1/20
tagged Port-channel 127
no shutdown
end
write memory
7.3 Single switch
This example uses a four-node VxRail cluster connected to a single switch as shown below.
25GbE connections
Rack 1
S5048F-ON
1/23 1/21 1/19 1/17
VxRail node 1
VxRail node 2
VxRail node 3
VxRail node 4
1/18 1/20 1/22 1/24
The jump box/DNS server, not shown,
is connected to ports 1/9 and 1/10.
Four-node cluster connected to a single switch
The commands in the following sections are run to complete the switch configuration. The port numbers used
in the configuration commands correspond to those shown in Figure 14.
Note: The commands in the tables below should be entered in the order shown. All commands are provided
in the file attachment named S5048F-single-switch.txt.