White Papers
Figure 58. NDP Router Redirect
IPv6 Neighbor Discovery of MTU Packets
You can set the MTU advertised through the RA packets to incoming routers, without altering the actual MTU setting on the interface.
The ipv6 nd mtu command sets the value advertised to routers. It does not set the actual MTU rate. For example, if you set ipv6 nd
mtu
to 1280, the interface still passes 1500-byte packets, if that is what is set with the mtu command.
Secure Shell (SSH) Over an IPv6 Transport
Dell Networking OS supports both inbound and outbound SSH sessions using IPv6 addressing.
Inbound SSH supports accessing the system through the management interface as well as through a physical Layer 3 interface.
For SSH conguration details, refer to the Security chapter in the Dell Networking OS Command Line Interface Reference Guide.
Conguration Tasks for IPv6
The following are conguration tasks for the IPv6 protocol.
• Adjusting Your CAM-Prole
• Assigning an IPv6 Address to an Interface
• Assigning a Static IPv6 Route
• Conguring Telnet with IPv6
• SNMP over IPv6
• Showing IPv6 Information
• Clearing IPv6 Routes
IPv6 Routing
463