White Papers

interface port-type slot/port
NOTE: By default, a port is enabled for bridge-to-ENode links.
6 Congure the port for bridge-to-FCF links.
INTERFACE mode or CONFIGURATION mode
fip-snooping port-mode fcf
To disable the FCoE transit feature or FIP snooping on VLANs, use the no version of a command; for example, no feature fip-
snooping or no fip-snooping enable.
Displaying FIP Snooping Information
To display information on FIP snooping, use the following show commands.
Table 28. Displaying FIP Snooping Information
Command Output
show fip-snooping sessions [interface vlan
vlan-id]
Displays information on FIP-snooped sessions on all VLANs or a
specied VLAN, including the ENode interface and MAC address,
the FCF interface and MAC address, VLAN ID, FCoE MAC address
and FCoE session ID number (FC-ID), worldwide node name
(WWNN) and the worldwide port name (WWPN).
show fip-snooping config
Displays the FIP snooping status and congured FC-MAP values.
show fip-snooping enode [enode-mac-address]
Displays information on the ENodes in FIP-snooped sessions,
including the ENode interface and MAC address, FCF MAC
address, VLAN ID and FC-ID.
show fip-snooping fcf [fcf-mac-address]
Displays information on the FCFs in FIP-snooped sessions, including
the FCF interface and MAC address, FCF interface, VLAN ID, FC-
MAP value, FKA advertisement period, and number of ENodes
connected.
clear fip-snooping database interface vlan
vlan-id {fcoe-mac-address | enode-mac-address |
fcf-mac-address}
Clears FIP snooping information on a VLAN for a specied FCoE
MAC address, ENode MAC address, or FCF MAC address, and
removes the corresponding ACLs FIP snooping generates.
show fip-snooping statistics [interface vlan
vlan-id| interface port-type port/slot |
interface port-channel port-channel-number]
Displays statistics on the FIP packets snooped on all interfaces,
including VLANs, physical ports, and port channels.
clear fip-snooping statistics [interface vlan
vlan-id | interface port-type port/slot |
interface port-channel port-channel-number]
Clears the statistics on the FIP packets snooped on all VLANs, a
specied VLAN, or a specied port interface.
show fip-snooping system
Displays information on the status of FIP snooping on the switch
(enabled or disabled), including the number of FCoE VLANs, FCFs,
ENodes, and currently active sessions.
show fip-snooping vlan
Displays information on the FCoE VLANs on which FIP snooping is
enabled.
NOTE: The show fip-snooping fcf command may continue to display FCFs the S5000 Fibre Channel ports advertise even
if the ports are shut down because the FIP snooping feature does not interpret the A-bit in the FIP VLAN advertisements. When
you congure the S5000 as an NPIV proxy gateway, use the show interfaces status command to check if the S5000
Fibre Channel ports connected to the FCF are up or down.
330 FCoE Transit