White Papers
Displaying VRRP in a VRF Conguration
To display information on a VRRP group that is congured on an interface that belongs to a VRF instance, use the following commands.
• Display information on a VRRP group that is congured on an interface that belongs to a VRF instance.
show running-config track [interface interface]
• Display information on VRRP groups congured on interfaces that belong to a VRF instance.
show vrrp vrf [vrf instance]
Examples of Verifying the Conguration and Status on the VRRP in a VRF
The following example shows viewing the conguration of VRRP in a VRF (interface).
Dell#show running-config track interface tengigabitethernet 13/4
interface TenGigabitEthernet 13/4
ip vrf forwarding red
ip address 192.168.0.1/24
vrrp-group 4
virtual-address 192.168.0.254
no shutdown
The following example shows viewing the status of VRRP in a VRF (global).
Dell#show vrrp vrf red
------------------
TenGigabitEthernet 13/4, IPv4 Vrrp-group: 4, VRID: 65, Version: 2, Net: 192.168.0.1
VRF: 1 red
State: Master, Priority: 100, Master: 192.168.0.1 (local)
Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec
Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 9, Gratuitous ARP sent: 1
Virtual MAC address:
00:00:5e:00:01:41
Virtual IP address:
192.168.0.254
Authentication: (none)
1084
Virtual Router Redundancy Protocol (VRRP)