Users Guide

address family
This command changes the context to subsequent address family identier (SAFI).
Syntax
address family ipv6 unicast
To remove SAFI context, use the no address family ipv6 unicast command.
Parameters
ipv6 Enter the keyword ipv6 to specify the address family as IPv6.
unicast Enter the keyword unicast to specify multicast as SAFI.
Defaults IPv6 Unicast
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage Information
After this command is executed, all subsequent commands apply to this address family. You can exit from
this AFI/SAFI to the IPv6 Unicast (the default) family by entering the exit command and returning to the
Router BGP context.
aggregate-address
Summarize a range of prexes to minimize the number of entries in the routing table.
Syntax
aggregate-address ipv6-address prefix-length [advertise-map map-name] [as-
set] [attribute-map map-name] [summary-only] [suppress-map map-name]
Parameters
ipv6-address prex-
length
Enter the IPv6 address in the x:x:x:x::x format then the prex length in the / x
format. The range is from /0 to /128.
NOTE: The :: notation species successive hexadecimal elds of zeros.
advertise-map
map-name
(OPTIONAL) Enter the keywords advertise-map then the name of a
congured route map to set lters for advertising an aggregate route.
as-set (OPTIONAL) Enter the keywords as-set to generate path attribute information
and include it in the aggregate. AS_SET includes AS_PATH and community
information from the routes included in the aggregated route.
984
IPv6 Border Gateway Protocol (IPv6 BGP)