Users Guide

Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage Information When you enable the bgp non-deterministic-med command, the show ip bgp command output
for a BGP route does not list the INACTIVE reason.
show ip bgp ipv6 unicast cluster-list
View BGP neighbors in a specic cluster.
Syntax
show ip bgp ipv6 unicast cluster-list [cluster-id]
Paramters
cluster-id (OPTIONAL) Enter the cluster id in dotted decimal format.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
show ip bgp ipv6 unicast community
View information on all routes with community attributes or view specic BGP community groups.
Syntax
show ip bgp ipv6 unicast community [community-number] [local-as] [no-
export] [no-advertise]
Paramters
community-number Enter the community number in AA:NN format where AA is the AS number (2
bytes) and NN is a value specic to that autonomous system. You can specify up to
eight community numbers to view information on those community groups.
local-AS Enter the keywords local-AS to view all routes with the COMMUNITY attribute
of NO_EXPORT_SUBCONFED. All routes with the NO_EXPORT_SUBCONFED
(0xFFFFFF03) community attribute must not be advertised to external BGP peers.
968
IPv6 Border Gateway Protocol (IPv6 BGP)