Users Guide

router bgp
Enter ROUTER BGP mode to congure and enable BGP.
Syntax
router bgp as-number
To disable BGP, use the no router bgp as-number command.
Parameters
as-number Enter the AS number. The range is from 1 to 65535.
Defaults Not enabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
show capture bgp-pdu neighbor
Display BGP packet capture information for an IPv6 address.
Syntax
show capture bgp-pdu neighbor ipv6-address
Parameters
ipv6-address Enter the IPv6 address (X:X:X:X::X) of a BGP neighbor.
Defaults
• EXEC
• EXEC Privilege
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
IPv6 Border Gateway Protocol (IPv6 BGP)
965