Users Guide

neighbor lter-list
Congure a BGP lter based on the AS-PATH attribute.
Syntax
neighbor {ipv6-address | peer-group-name} filter-list as-path-name {in |
out}
To delete a BGP lter, use the no neighbor {ipv6-address | peer-group-name} filter-
list as-path-name {in | out} command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation species successive hexadecimal elds of zeros.
peer-group-name Enter the name of the peer group to apply the lter to all routers in the peer group.
in Enter the keyword in to lter inbound BGP routes.
out Enter the keyword out to lter outbound BGP routes.
Defaults Not congured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
neighbor maximum-prex
Control the number of network prexes received.
Syntax
neighbor {ipv6-address | peer-group-name} maximum-prefix maximum
[threshold] [warning-only]
To return to the default values, use the no neighbor {ipv6-address | peer-group-name}
maximum-prefix maximum [threshold] [warning-only] command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation species successive hexadecimal elds of zeros.
946
IPv6 Border Gateway Protocol (IPv6 BGP)