Users Guide

peer-group-name Enter the name of the peer group to set the advertisement interval for all routers in
the peer group.
seconds Enter a number as the time interval, in seconds, between BGP advertisements. The
range is from 0 to 600 seconds. The default is 5 seconds for internal BGP peers
and 30 seconds for external BGP peers.
Defaults
• seconds = 5 seconds (internal peers)
• seconds = 30 seconds (external peers)
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
neighbor allowas-in
Set the number of times an AS number can occur in the AS path.
Syntax
neighbor {ip-address | peer-group-name} allowas-in number
To return to the default value, use the no neighbor {ip-address | peer-group-name}
allowas-in command.
Parameters
ip-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation species successive hexadecimal elds of zeros.
peer-group-name Enter the name of the peer group to set the advertisement interval for all routers in
the peer group.
number Enter a number of times to allow this neighbor ID to use the AS path. The range is
from 1 to 10.
Defaults Not congured.
Command Modes ROUTER BGP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
IPv6 Border Gateway Protocol (IPv6 BGP)
941