Users Guide

Destination Dist/Metric, Gateway, Last Change
-----------------------------------------------------
C 100::/64 [0/0]
Direct, Te 1/12, 20:00:18
C 400::/64 [0/0]
Direct, Tu 1, 00:09:02
S 800::/64 [1/0]
via 100::1, Te 1/12, 00:00:50
L fe80::/10 [0/0]
Direct, Nu 0, 20:00:18
Dell#
Example (Summary)
show ipv6 route summary:
======================================
Dell#show ipv6 route summary
Route Source Active Routes Non-active Routes
connected 3 0
static 1 0
Total 4 0
Total 4 active route(s) using 928 bytes
Dell#
trust ipv6-diserv
Allows the dynamic classication of IPv6 DSCP.
Syntax
trust ipv6-diffserv
To remove the denition, use the no trust ipv6-diffserv command.
Defaults none
Command Modes CONFIGURATION-POLICY-MAP-IN
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.4.2.1 Introduced on the C-Series and S-Series.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced on the E-Series TeraScale.
Usage Information
When you congure trust IPv6 diserv, matched bytes/packets counters are not incremented in the show
qos statistics command.
IPv6 Basics
905