Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S5000
881882883884885886887888889890
Related Commands
show cong – views the current conguration.
set ipv6 next-hop
Congure a lter that species IPv6 address as the next hop.
C-Series, E-Series, S-Series
Syntax
set ipv6 next-hop ipv6-address
To delete the setting, use the no set ipv6 next-hop ipv6-address command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation species successive hexadecimal elds of zeros.
Defaults Not congured.
Command Modes ROUTE-MAP
Command History
Version 8.4.2.1 Introduced on the S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage Information The set ipv6 next-hop command is the only way to set an IPv6 Next-Hop.
show cong
View the current route map conguration.
C-Series, E-Series, S-Series
Syntax
show config
Command Modes ROUTE-MAP
Command History
Version 8.4.2.1 Introduced on the S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Example
Dell(config-route-map)#show config
!
route-map Rmap1 permit 10
IPv6 Access Control Lists (IPv6 ACLs)
881