Users Guide

1 52-port GE/TE/FG (SE)
52 Ten GigabitEthernet/IEEE 802.3 interface(s)
Example (S6000)
Dell#S6000#show version
Dell Real Time Operating System Software
Dell Operating System Version: 2.0
Dell Application Software Version: 9-4(0-119)
Copyright (c) 1999-2014 by Dell Inc. All Rights Reserved.
Build Time: Tue Mar 18 10:32:02 PDT 2014
Build Path: /work.local/build/buildSpaces/build01/E9-4-0/SW/SRCC
Dell Networking OS uptime is 1 day(s), 0 hour(s), 19 minute(s)
System image file is "DT-MAA-S6000-16-PI"
System Type: S6000
Control Processor: Intel Centerton with 3203911680 bytes of memory,
core(s) 2.
16G bytes of boot flash memory.
1 32-port TE/FG (SI)
32 Forty GigabitEthernet/IEEE 802.3 interface(s)
upgrade system
Upgrade the Dell Networking OS image. To upgrade the bootash or bootselector image, use the upgrade boot command.
Syntax
upgrade system {flash: | ftp: | nfsmount: | scp: | stack-unit {stack-unit-id | all} | tftp: | usbflash:} file-url {A: |B:}
Parameters
system Enter the keyword system to upgrade the operating system (OS) image.
ash: le-url Enter the keyword flash: and specify the location of the image le in the format //directory-path or press Enter to launch a prompt sequence.
ftp: le-url Enter the keyword ftp: and specify the location of the image le in the format //userid:password@host-ip/filepath or press Enter to launch a prompt sequence.
nfsmount://
<mount-point>/
lepath
Enter the keyword nfsmount: and specify the location of the image le in the format //<mount-point>/filepath.
scp: le-url Enter the keyword scp: and specify the location of the image le in the format userid:password@host-ip/filepath or press Enter to launch a prompt sequence.
stack-unit stack-
unit-id
Enter the keyword stack-unit and specify the stack-unit ID to sync the image to that stack-unit.
stack-unit all Enter the keyword stack-unit followed by the keyword all to sync the image on all stack-units.
tftp: le-url Enter the keyword tftp: and specify the location of the image le in the format //host-ip/filepath or press Enter to launch a prompt sequence.
usbash: le-url Enter the keyword usbflash: and specify the location of the source le in the format //directory-path to upgrade form an external ash device or press Enter to launch a prompt sequence.
A: | B: Specify the ash partition of the operating-system image to be upgraded.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
88
File Management