Users Guide

Term Explanation
Status Indicates whether or not the policy is allowed in the CAM
Example (C-Series)
Dell#test cam-usage service-policy input LauraMapTest linecard all
Linecard|Portpipe|CAM Partition|Available CAM|Estimated CAM per Port|Status
--------------------------------------------------------------
2| 1| IPv4Flow| 232| 0| Allowed
2| 1| IPv6Flow| 0| 0| Allowed
4| 0| IPv4Flow| 232| 0| Allowed
4| 0| IPv6Flow| 0| 0| Allowed
Dell#
Dell#test cam-usage service-policy input LauraMapTest linecard
4 port-set 0
Linecard|Portpipe|CAM Partition|Available CAM|Estimated CAM per Port|Status
-------------------------------------------------------------
4| 0| IPv4Flow| 232| 0| Allowed
4| 0| IPv6Flow| 0| 0| Allowed
Dell#
Dell#test cam-usage service-policy input LauraMapTest linecard 2 port-set 1
Linecard|Portpipe| CAM Partition|Available CAM|Estimated CAM per Port|
Status
-----------------------------------------------------------------
2| 1| IPv4Flow| 232| 0| Allowed
2| 1| IPv6Flow| 0| 0| Allowed
Dell#
IPv6 Route Map Commands
The following commands allow you to congure route maps and their redistribution criteria.
match ipv6 address
Congure a lter to match routes based on IPv6 addresses specied in an access list.
C-Series, E-Series, S-Series
Syntax
match ipv6 address prefix-list-name
To delete a match, use the no match ipv6 address prefix-list-name command.
Parameters
prex-list-name Enter the name of IPv6 prex list, up to 140 characters.
Defaults Not congured.
Command Modes ROUTE-MAP
Command History
Version 8.4.2.1 Introduced on the S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series. Increased the name string to accept up to 140
characters. Prior to version 7.8.1.0, the names are up to 16 characters long.
878
IPv6 Access Control Lists (IPv6 ACLs)