Users Guide

Command History
Version 9.0.2.0 Introduced on the S6000.
Version 8.4.2.1 Introduced on the E-Series TeraScale and S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.4.1.0 Added the monitor option.
Related Commands
deny – congures a lter to drop packets.
permit – congures a lter to forward packets.
show cam-acl
Show space allocated for IPv6 ACLs.
Syntax
show cam-acl
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.4.2.1 Introduced on the S-Series.
8.4.2.0 Introduced on the E-Series TeraScale.
7.8.1.0 Introduced on the C-Series.
Example
show cam-acl (non default)
Dell(conf)#cam-acl l2acl 2 ipv4acl 4 ipv6acl 4 ipv4qos 2 l2qos 1 l2pt 0
ipmacacl 0 vman-qos 0 ecfmacl 0
Dell#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
1 block = 128 entries
L2Acl : 2
Ipv4Acl : 4
Ipv6Acl : 4
872
IPv6 Access Control Lists (IPv6 ACLs)