Users Guide
26
Fibre Channel Interface Commands
The following commands are supported for Fibre Channel operation on the S5000.
fabric
Congure the SAN fabric to which a Fibre Channel port connects.
S5000
Syntax
fabric fcoe-map
Parameters
fcoe-map Enter the name of the FCoE map which contains the FCoE/FC fabric to which the
Fibre Channel port connects.
Defaults None
Command Modes INTERFACE FIBRE_CHANNEL
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage Information
Use the fcoe-map command to bind an FC port to an FC-FCOE fabric.
When a Fibre Channel port operates in N mode, the principal switch in the fabric provides the FCoE
Forwarder (FCF) attributes, such as MAC address, FIP priority, and FIP keepalive timeout.
To removed the congured FCoE map, enter the no fabric command.
Example
Dell(conf)#interface fibrechannel 0/11
Dell(conf-if-fc-0/11)#fabric SAN_FABRIC_A
Related Commands
interface brechannel — congures a Fibre Channel interface on the switch.
show interfaces brechannel — displays the conguration of a Fibre Channel interface.
fc ping
Sends FC ping packets to target.
Syntax
fc ping wwn [ count | timeout]
Fibre Channel Interface Commands
775