Users Guide
Defaults The S5000 is not enabled to operate in Fibre Channel mode.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage Information
Use this command to congure the S5000 to interoperate with Fibre Channel devices in SAN fabrics.
Enter the no feature fc command to disable the Fibre Channel command-line interface and free
memory resources allocated to Fibre Channel operation.
Example
Dell(conf)#feature fc
Related Commands
show interfaces brechannel — displays the conguration of a Fibre Channel interface.
member — alias
Add devices to an alias.
S5000
Syntax
member name
To remove devices from the alias, use the no member name command
Parameters
name Enter the WWPN, port ID, or domain/port.
Command Modes ALIAS CONFIGURATION
Command History
Version 9.1(1.0) Introduced on the S5000.
Example
Dell(conf)# fc alias alias1
Dell(conf-fc-alias-alias1)#member 30:11:11:02:0a:10:01:02
Dell(conf-fc-alias-alias1)#
Related Commands
show fc zoneset — displays the congured and active zoneset.
show fc zone — displays the congured zone.
member — zone
Add devices to a zone.
S5000
Syntax
member name
764
Fabric Services Commands