Users Guide

Related Commands
show interfaces — displays information on a specic physical interface or virtual interface.
show interfaces description
Display the descriptions congured on the interface.
Syntax
show interfaces [interface] description
Parameters
interface (Optional) Enter one of the following keywords and slot/port or number
information:
• For a Fast Ethernet interface, enter the keyword FastEthernet followed by
the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
followed by the slot/port information.
•
For Loopback interfaces, enter the keyword loopback followed by a number
from 0 to 16383.
• For the management interface on the RPM, enter the keyword
ManagementEthernet followed by the slot/port information. The slot range
is 0-1 and the port range is 0.
• For the Null interface, enter the keywords null 0.
• For a Port Channel interface, enter the keywords port-channel followed by
a number. For the C-Series and S-Series, the range is 1 to 128. For the E-Series,
the range is 1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword sonet followed by the slot/ port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed
by the slot/port information.
• For VLAN interfaces, enter the keyword vlan followed by a number from 1 to
4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
718
Interfaces