Users Guide

longer-prexes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a
common prex.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.
Usage Information When you enable the bgp non-deterministic-med command, the show ip bgp command output
for a BGP route does not list the INACTIVE reason.
The following describes the show ip bgp ipv4 multicast command shown the Example below.
Field Description
Network Displays the destination network prex of each BGP route.
Next Hop Displays the next hop address of the BGP router. If 0.0.0.0 is listed in this column,
then local routes exist in the routing table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight.
Path Lists all the ASs the route passed through to reach the destination network.
Example
Dell#show ip bgp ipv4 multicast
BGP table version is 14, local router ID is 100.10.10.1
Status codes: s suppressed, S stale, d damped, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r -
redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*>I 25.1.0.0/16 25.25.25.25 0 100 0 i
*>I 25.2.0.0/16 25.25.25.26 0 100 0 ?
*>I 25.3.0.0/16 211.1.1.165 0 100 0 ?
*>r 144.1.0.0/16 0.0.0.0 0 32768 ?
*>r 144.2.0.0/16 100.10.10.10 0 32768 ?
*>r 144.3.0.0/16 211.1.1.135 0 32768 ?
*>n 145.1.0.0/16 0.0.0.0 0 32768 i
Dell#
Related Commands
show ip bgp community – views the BGP communities.
Border Gateway Protocol
479