Users Guide

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
To remove all congured debug commands for BGP, enter the no debug ip bgp command.
debug ip bgp peer-group updates
View information about BGP peer-group updates.
Syntax
debug ip bgp peer-group peer-group-name updates [in | out]
To disable debugging, use the no debug ip bgp peer-group peer-group-name updates [in
| out] command.
Parameters
peer-group peer-
group-name
Enter the keywords peer-group followed by the name of the peer-group.
updates Enter the keyword updates to view BGP update information.
in (OPTIONAL) Enter the keyword in to view only BGP updates received from
neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP updates sent to neighbors.
Command Modes EXEC Privilege
Command History
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.
386
Border Gateway Protocol