Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S5000
351352353354355356357358359360
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced
Usage Information Conguring this option retains the current best-path. When sessions are then reset, the oldest received path
is chosen as the best-path.
bgp client-to-client reection
Allows you to enable route reection between clients in a cluster.
Syntax
bgp client-to-client reflection
To disable client-to-client reection, use the no bgp client-to-client reflection command.
Defaults Enabled when a route reector is congured.
Command Modes ROUTER BGP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information Route reection to clients is not necessary if all client routers are fully meshed.
Related Commands
bgp cluster-id — assigns an ID to a BGP cluster with two or more route reectors.
neighbor route-reector-client — congures a route reector and clients.
Border Gateway Protocol
359