Users Guide

Version Description
7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names
are up to 16 characters long.
pre-Version 6.1.1.0 Introduced on the E-Series.
Usage Information To apply the AS-PATH ACL to BGP routes, use the match as-path or neighbor filter-list
commands.
Example
Dell(conf)#ip as-path access-list TestPath
Dell(config-as-path)#
Related Commands
match as-path — matches on routes contain a specic AS-PATH.
show ip as-path-access-lists
Display the all AS-PATH access lists congured on the E-Series.
Syntax
show ip as-path-access-lists
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
pre-Version 6.1.1.0 Introduced on the E-Series.
Example
Dell#show ip as-path-access-lists
ip as-path access-list acc
permit 750
deny 10
IP Community List Commands
IP community list commands are supported on the Dell Networking OS.
ip community-list
Enter COMMUNITY-LIST mode and create an IP community-list for BGP.
Syntax
ip community-list comm-list-name
284
Access Control Lists (ACL)