Users Guide

Usage Information The set local-preference command changes the LOCAL_PREF attribute for routes meeting the
route map criteria. To change the LOCAL_PREF for all routes, use the bgp default local-
preference
command.
Related Commands bgp default local-preference — changes the default LOCAL_PREF attribute for all routes.
set metric
To assign a new metric to redistributed routes, congure a lter.
Syntax
set metric [+ | -] metric-value
To delete a setting, enter no set metric.
Parameters
+ (OPTIONAL) Enter + to add a metric-value to the redistributed routes.
- (OPTIONAL) Enter - to subtract a metric-value from the redistributed routes.
metric-value Enter a number as the new metric value. The range is from zero (0) to
4294967295.
Defaults Not congured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related Commands
set automatic-tag — computes the tag value of the route.
set level — species the OSPF area for route redistribution.
set metric-type — species the route type assigned to redistributed routes.
set tag — species the tag assigned to redistributed routes.
Access Control Lists (ACL)
277