Users Guide

If the route-map entry contains sets with the continue clause, set actions are performed rst then the
continue clause jumps to the specied route map entry.
• If a set action occurs in the rst route map entry and then the same set action occurs with a dierent
value in a subsequent route map entry, the last set of actions overrides the previous set of actions with
the same set command.
• If set community additive and set as-path prepend are congure, the communities and
AS numbers are prepended.
Related Commands
set community — species a COMMUNITY attribute.
set as-path — congures a lter to modify the AS path.
description
Add a description to this route map.
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
description Enter a description to identify the route map (80 characters maximum).
Defaults none
Command Modes ROUTE-MAP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
pre-7.7.1.0 Introduced.
Related Commands route-map — enables a route map.
match as-path
To match routes that have a certain AS number in their BGP path, congure a lter.
Syntax
match as-path as-path-name
To delete a match AS path lter, use the no match as-path as-path-name command.
Access Control Lists (ACL)
261