Users Guide

Parameters
prex-name Enter a string up to 16 characters long as the name of the prex list, up to 140
characters long.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names
are up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information Prex lists redistribute OSPF and RIP routes meeting specic criteria.
Related Commands
show ip route list — displays IP routes in an IP prex list.
show ip prex-list summary — displays a summary of the congured prex lists.
seq
To a deny or permit lter in a prex list while conguring the lter, assign a sequence number.
Syntax
seq sequence-number {deny | permit} {any} | [ip-prefix /nn {ge min-prefix-
length} {le max-prefix-length}] | [bitmask number]
To delete a specic lter, use the no seq sequence-number {deny | permit} {any} | [ip-
prefix {ge min-prefix-length} {le max-prefix-length}] | [bitmask number].
Parameters
sequence-number Enter a number. The range is from 1 to 4294967294.
deny Enter the keyword deny to congure a lter to drop packets meeting this
condition..
permit Enter the keyword permit to congure a lter to forward packets meeting this
condition.
any (OPTIONAL) Enter the keyword any to match any packets.
256
Access Control Lists (ACL)