Users Guide

Parameters
stack-unit stack-
unit {command-
option}
Enter the keywords stack-unit to select a particular stack member and then
enter one of the following command options to display a collection of data based
on the option entered.
buer Enter the keyword buffer. To display the total buer statistics for the stack unit,
enter the keyword total-buffer. To display buer statistics for a all interface,
enter the keyword
interface followed by the keyword all.
To display total buer information for the port, enter the keywords buffer-info.
To display a queue range, enter 0 to 14 for a specc queue or all.
cpu data-plane
statistics
(Optional) Enter the keywords cpu data-plane statistics then the
keywords stack port and its number, to display the data plane statistics, which
shows the High Gig (
Higig) port raw input/output counter statistics to which the
stacking module is connected.
cpu management
statistics
Enter the keywords cpu management statistics to display the counters of
the management port.
drops [unit unit-
number]
Enter the keyword drops to display internal drops on the selected stack member.
Enter the drops keyword to display internal drops on the selected stack member.
fpga register Enter the keyword to display the register value of fpga resgister details in S4810,
Z9000 and S6000.
unit unit-number
{counters | details |
port-stats [detail] |
register}
Enter the keyword unit then and then enter one of the following keywords to
troubleshoot errors on the selected port-pipe and to give status on why a port is
not coming up to register level: counters, details, port-stats [detail],
or
register.
TI monitor Enter the unit keyword to show information regarding the TI register.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Replaced the keyword port with interface.
9.7(0.0) Introduced on the S6000-ON.
9.2(0.2) Modied the drops keyword range, unit keyword range and added the buffer
and cpu management statistics options.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.5 Added i2c statistics and sata-interfaces statistics.
8.3.11.4 Added user port information.
1804
Debugging and Diagnostics