Users Guide

If the default buer-prole is active, Dell Networking OS displays an error message instructing you to
remove the default conguration using the no buffer-profile global command.
Reload the system for the global buer-prole to take eect.
show buer-prole stack-unit
Display the buer prole that is applied to a stack-unit.
S5000
Syntax
show buffer-profile stack—unit unit-number
Parameters
stack-unit unit-
number
Enter the keyword stack-unit followed by the unit number. The range is 0 to 11.
If you do not type a unit number, Dell Networking OS displays buer-proles for all
units.
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example (single unit)
Dell#show buffer-profile stack-unit 0
Stack-Unit Current Buffer-Profile Next-Boot Buffer-Profile
---------- ---------------------- ------------------------
0 Default (Dynamic) Default (Dynamic)
Dell#
Related Commands
buer-prole (Conguration) – creates a buer prole that can be applied to an interface.
Hardware Commands
These commands display information from a hardware sub-component or ASIC.
clear hardware stack-unit
Clear statistics from selected hardware components.
Syntax
clear hardware stack-unit id {counters | unit 0–0 counters | cpu data-plane
statistics | cpu i2c statistics | cpu party-bus statistics | cpu sata-
interface statistics | stack-port 0–127}
Debugging and Diagnostics
1799