Users Guide

• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Defaults Not congured.
Command Modes CONF-IF-VLAN
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.11.1 Introduced on the Z9000.
8.2.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the C-Series and S-Series.
Usage Information You must enable the stackable VLAN (using the vlan-stack compatible command) on the VLAN
prior to adding a member to the VLAN.
Related Commands vlan-stack compatible — enables stackable VLAN on a VLAN.
show interface dei-honor
Display the dei honor conguration.
Syntax
show interface dei-honor [interface slot/port | linecard number port-set
number]
Parameters
interface slot/port Enter the interface type followed by the line card slot and port number.
linecard number
port-set number
Enter linecard followed by the line card slot number, then enter port-set
followed by the port-pipe number.
Command Modes EXEC Privilege
Command History
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the C-Series and S-Series.
Example
Dell#show interface dei-honor
Default Drop precedence: Green
Interface CFI/DEI Drop precedence
---------------------------------------------
1730
VLAN Stacking