Users Guide

!.!.!.!!.01:01:34: %STKUNIT7-M:CP %SYSADM-5-CPU_THRESHOLD: Overall cpu usage of stack-unit
10 is above threshold. Cpu1minUsage (90%)
01:01:34: %STKUNIT7-M:CP %SYSADM-5-TASK_CPU_THRESHOLD: 1min cpu utilization of stack-unit 10
has exceeded the threshold. Top three processes are dla (88.75%), KP (2.50%), frrpaRecv
(0.00%)
!.!.!.!.!01:01:40: %STKUNIT7-M:CP %SYSADM-5-CPU_THRESHOLD: Overall cpu usage of stack-unit 9
is above threshold. Cpu1minUsage (96%)
01:01:40: %STKUNIT7-M:CP %SYSADM-5-TASK_CPU_THRESHOLD: 1min cpu utilization of stack-unit 9
has exceeded the threshold. Top three processes are dla (94.83%), KP (2.17%), frrpaRecv
(0.00%)
!.01:01:40: %STKUNIT7-M:CP %SYSADM-5-CPU_THRESHOLD: Overall cpu usage of stack-unit 11 is
above threshold. Cpu1minUsage (96%)
01:01:40: %STKUNIT7-M:CP %SYSADM-5-TASK_CPU_THRESHOLD: 1min cpu utilization of stack-unit 11
has exceeded the threshold. Top three processes are dla (94.58%), KP (2.25%), frrpaRecv
(0.00%)
!.!.!.!.!01:01:45: %STKUNIT7-M:CP %SYSADM-5-CPU_THRESHOLD: Overall cpu usage of stack-unit 0
is above threshold. Cpu1minUsage (91%)
01:01:46: %STKUNIT7-M:CP %SYSADM-5-TASK_CPU_THRESHOLD: 1min cpu utilization of stack-unit 0
has exceeded the threshold. Top three processes are dla (89.75%), KP (2.67%), frrpaRecv
(0.00%)
!.!.!.!.!!.!.!.!.!!.!.!.!.!.!!.!.!.!.!!.!.!.!.!.!.!!.!.!.!.!.!!.!.!.!.!.!!.!.!.!.!.!.!!.!.!.!
.!!.!.!.!.!!.!.!.!.!.!.!!.!.!.!.!.!!.!.!.!.!.!.!!.!.!.!.!.!!.!.!.!.!!.!.!.!.!.!
Bootflash image upgrade for all completed successfully.
upgrade system (stack unit)
Upgrade the Dell Networking OS image on one or all stack units in an S5000 stack from the master switch.
S5000
Syntax
upgrade system {flash://file-path | ftp://file-path | scp://file-path |
tftp://file-path | usbflash://file-path} | stack-unit {stack-unit—id | all}
{A: | B:}}
Parameters
boot Enter the keyword system to change the Dell Networking OS image.
ash: After the keyword flash:, enter the location of the source le in the internal ash
in the format: //file-pathname or press Enter to launch a prompt sequence.
ftp: After the keyword ftp:, enter the location of the source le in the format: //
userid:password@host-ipaddress/file—pathname or press Enter to
launch a prompt sequence.
scp: After the keyword scp:, enter the location of the source le in the format: //
userid:password@host-ip-address/file-pathname or press Enter to
launch a prompt sequence.
tftp: After the keyword tftp:, enter the location of the source le in the format: //
host-ipaddress/file-pathname or press Enter to launch a prompt
sequence.
usbash: After the keyword usbflash:, enter the location of the source le in the external
ash in the format: //file-path or press Enter to launch a prompt sequence.
le-path Enter the path and lename to be used to upgrade the Dell Networking OS image.
stack-unit {stack-
unit-id | all}
Enter the keyword stack-unit: followed by the stack unit ID of a member unit
or all to upgrade the boot image on all stack member units. Valid stack-unit ID
numbers are 0 to 11.
1678
Stacking Commands