Users Guide

Command History
Version 8.3.10.2 Introduced on the S4810.
Example
Dell#show system stack-unit 0 stack-group
Stack Group Ports
------------------------------
0 0/0, 1, 2, 3
1 0/4, 5, 6, 7
2 0/8, 9, 10, 11
3 0/12, 13, 14, 15
4 0/16, 17, 18, 19
...
13 0/48
14 0/52
15 0/56
16 0/60
stack-unit priority
Congure the ability of a switch to become the management unit of a stack.
Syntax
stack-unit stack-unit number priority 1-14
Parameters
stack-number Enter the stack member unit identier.
1–14 This preference parameter allows you to specify the management priority of one
backup switch over another, with 0 the lowest priority and 14 the highest. The
switch with the highest priority value is chosen to become the management unit if
the active management unit fails or on the next reload.
Defaults 0
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Related Commands
• reload – reboots Dell Networking OS.
1674
Stacking Commands