Users Guide

show vlan private-vlan – displays the PVLANs and/or interfaces that are part of a PVLAN.
show vlan private-vlan mapping – displays the primary-secondary VLAN mapping.
switchport mode private-vlan – sets PVLAN mode of the selected port.
show vlan private-vlan
Display PVLANs and/or interfaces that are part of a PVLAN.
Syntax
show vlan private-vlan [community | interface | isolated | primary |
primary_vlan | interface interface]
Parameters
community (OPTIONAL) Enter the keyword community to display VLANs congured as
community VLANs, along with their interfaces.
interface (OPTIONAL) Enter the keyword interface to display VLANs congured as
community VLANs, along with their interfaces.
isolated (OPTIONAL) Enter the keyword isolated to display VLANs congured as
isolated VLANs, along with their interfaces.
primary (OPTIONAL) Enter the keyword primary to display VLANs congured as primary
VLANs, along with their interfaces.
primary_vlan (OPTIONAL) Enter a private VLAN ID or secondary VLAN ID to display interface
details about the designated PVLAN.
interface interface (OPTIONAL) Enter the keyword interface and an interface ID to display the
PVLAN conguration of the designated interface.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.1 Introduced on the S4810.
Version 7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information
Examples of all types of command output are shown below. The rst type of output is the result of not
entering an optional keyword. It displays a detailed list of all PVLANs and their member VLANs and
interfaces. The other types of output show details about PVLAN subsets.
The following describes the show private-vlan command shown in the Examples below.
1460
Private VLAN (PVLAN)