Users Guide

clear ip pim tib
Clear PIM tree information from the PIM database.
S5000
Syntax
clear ip pim [vrf vrf-name] tib [group]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to
congure this setting on that VRF.
NOTE: Applies to specic VRF if input is provided, else applies to Default
VRF.
group (OPTIONAL) Enter the multicast group address in dotted decimal format (A.B.C.D).
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the S-Series.
Usage Information If you use this command on a local VLT node, all multicast routes from the local PIM TIB, the entire multicast
route table, and all the entries in the data plane are deleted. The local VLT node sends a request to the peer
VLT node to download multicast routes learned by the peer. Both local and synced routes are removed from
the local VLT node multicast route table. The peer VLT node clears synced routes from the node.
If you use this command on a peer VLT node, only the synced routes are deleted from the multicast route
table.
clear ip pim rp-mapping
The bootstrap router (BSR) feature uses this command to remove all or particular rendezvous point (RP) advertisement.
S5000
Syntax
clear ip pim [vrf vrf-name] rp-mapping [rp-address]
1356
PIM-Sparse Mode (PIM-SM)