Users Guide

pem Enter the keyword pem to view only information on power entry modules.
thermal-sensor Enter the keyword thermal-sensor to view information on thermal sensors.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell Networking OS
Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.8.1.0 The output of the show environment fan command for the S-Series is changed to display
fan speeds instead of showing the fan status as up or down.
Usage Information The following example shows the output of the show environment command.
Example (all)
Dell#show environment
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed Fan2 Speed Fan3
Speed
------------------------------------------------------------------------------------
0 0 absent
0 1 up up 12000 up 12000 up 12000 up
12000
0 2 up up 12000 up 12000 up 12000 up
12000
0 3 absent
Speed in RPM
-- Power Supplies --
Unit Bay Status Type FanStatus
----------------------------------------------------------------------------
0 0 up AC up
0 3 up AC up
-- Thermal Sensor Readings (degree C) --
-- Unit 0--
S0 S1 S2 S3 S4 S5 S6 S7
----------------------------------------------------------------------------
BASE BOARD 70 38 41 42 43 57 39 40
Module 0 43 44 36 37 33 31 - -
Module 1 43 44 36 31 32 31 - -
Module 2 42 42 36 32 30 31 - -
Module 3 42 43 36 31 31 31 - -
Control and Monitoring
135