Users Guide

Lines Beginning
With or
Including
Description
• 5 - link state acknowledgement
• 7 - external LSA
• 8 - link-state advertisement (OSPFv3)
• 9 - link local LSA (OSPFv2), Intra-Area-Prex LSA (OSPFv3)
• 11 - grace LSA (OSPFv3)
Length: Displays the packet length.
Router ID: Displays the OSPF3 router ID.
Area ID: Displays the Area ID.
Chksum: Displays the OSPF3 checksum.
default-information originate
Congure the Dell Networking OS to generate a default external route into an OSPFv3 routing domain.
Syntax
default-information originate [always] [metric metric-value] [metric-type
type-value] [route-map map-name]
To return to the default values, use the no default-information originate command.
Parameters
always (OPTIONAL) Enter the keyword always to specify that default route information
must always be advertised.
metric metric-value (OPTIONAL) Enter the keyword metric then a number to congure a metric
value for the route. The range is from 1 to 16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then an OSPFv3 link state type
of 1 or 2 for default routes. The values are:
• 1 = Type 1 external route
• 2 = Type 2 external route
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an established
route map.
Defaults Disabled.
Command Modes ROUTER OSPFv3
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.1.(0.0) Introduced on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
1322
Open Shortest Path First (OSPFv2 and OSPFv3)