Users Guide

• MC+ (bit used by MOSPF is set and router is able to forward IP multicast
packets)
• MC- (bit used by MOSPF is not set and router cannot forward IP multicast
packets)
• E + (router is able to accept AS External LSAs)
• E - (router cannot accept AS External LSAs)
• T + (router can support TOS)
• T - (router cannot support TOS)
hi: Displays the amount of time congured for the HELLO interval.
di: Displays the amount of time congured for the DEAD interval.
dr: Displays the IP address of the designated router.
bdr: Displays the IP address of the Border Area Router.
Example
Dell#debug ip ospf 1 packet
OSPF process 90, packet debugging is on
Dell#
08:14:24 : OSPF(100:00):
Xmt. v:2 t:1(HELLO) l:44 rid:192.1.1.1
aid:0.0.0.1 chk:0xa098 aut:0 auk: keyid:0 to:Te 4/3 dst:224.0.0.5
netmask:255.255.255.0 pri:1 N-, MC-, E+, T-,
hi:10 di:40 dr:90.1.1.1 bdr:0.0.0.0
redistribute bgp
Redistribute BGP routing information throughout the OSPF instance.
Syntax
redistribute bgp as number [metric metric-value] | [metric-type type-value]
| [tag tag-value]
To disable redistribution, use the no redistribute bgp as number [metric metric-value]
| [metric-type type-value] [route-map map-name] [tag tag-value] command.
Parameters
as number Enter the autonomous system number. The range is from 1 to 65535.
metric metric-value (OPTIONAL) Enter the keyword metric then the metric-value number. The range
is from 0 to16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then one of the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into
OSPF. The range is from 0 to 4294967295.
Open Shortest Path First (OSPFv2 and OSPFv3)
1277