Users Guide

Field Description
Members S5000 Ethernet and FC ports that are members of the dedicated FCoE VLAN that
carries storage trac to the specied fabric.
Example
Dell#show fcoe-map brief
Fabric-Name Fabric-Id Vlan-Id FC-MAP FCF-Priority Config-State
Oper-State
default_full_fabric 1002 1002 0efc00 128 ACTIVE UP
Dell#
Dell#show fcoe-map
Fabric Name default_full_fabric
Fabric Type full-fabric
Fabric Id 1002
Vlan Id 1002
Vlan priority 3
FC-MAP 0efc00
FKA-ADV-Period 8
Fcf Priority 128
Config-State ACTIVE
Oper-State UP
=======================================================
Switch Config Parameters
=======================================================
R_A_TOV (ms) 10000
R_T_TOV (ms) 100
E_D_TOV (ms) 2000
DomainID 2
DomainID-Locked OFF
Principal-Pri 254
=======================================================
Switch Zoning Parameters
=======================================================
Default Zone Mode: Deny
Active Zoneset: None
=======================================================
Members
Fc 0/0 Fc 0/1 Fc 0/2 Fc 0/3 Fc 0/4 Fc 0/5 Fc 0/6 Fc 0/7 Fc 0/8 Fc 0/9 Fc
0/10 Fc 0/11
=======================================================
=======================================================
Dell#
Related Commands
fcoe-map — creates an FCoE map which contains the parameters used in the communication between
servers and a SAN fabric.
fc zoneset — creates a zoneset.
NPIV Proxy Gateway
1235